CNC Cutting Machines

The Plas-Cutter, multi function table is your answer. A extremely, well built custom make welded table. This unit is designed to allow you access to the whole cutting area, by placing your material on the table from either end or from the top. Our new design allows you to place your material on the table without damaging the Gantry as the Gantry is able to be parked off the end of the table out of the way .

Y axis moves on a special designed T rail and rack and pinion gear track . The Y axis travels using 2- 660 oz, stepper motors that are fully enclosed eliminating accidental damage from shop equipment running into it. X and Z axis moves on a 15 mm Linear rail and bearing system for extreme precision and accuracy.The X and Z axis travel using 270 oz, stepper motors for extra torque power. It also includes a plasma torch head mount for either a plasma machine torch, or oxy-fuel flame head at no additional cost.

The Plas-Cutter, unlike other tables is made using four 4×4 and two 2×4,188 wall tubing for the legs and extra cross supports are place across the bottom. This allows plate weight capacity of 5000 lbs or more.

The Plas-Cutter, multi function table can be used for Plasma Cutting, Oxy/Fuel Cutting, HVAC Cutting, Can also be adapted for Router and PVC Cutting and is ready to put to work within minutes of uncrating as it’s table software comes totally setup and calibrated to start cutting when you receive it.This eliminates extra setup and reading of instructions on how to set table perimeters.

This unit is complete with heavy ware bar grading that makes it easy to retrieve parts as the ware bars make it nearly impossible for cut parts to fall through.
The Water Tray also has two recessed drain plugs that helps to speed up water changing. Water Tray is also designed to eliminate smoke and catch smoldering slag and extinguish it . You can also install a fan system that would easily create a down draft system if you like.

The Plas-Cutter, has a travel and cut speed of 10-500 inches per minute and is accurate within +/-.0005 of an inch.

OTHER SIZES AVAILABLE

4×5, 4×8, 4×10, 4×12, 5X5, 5X8, 5X10, 5X12

And any other custom size you require

UNLIMITED TECHNICAL SUPPORT.

Profession courteous technical people to help you through your setup. Even if you never operated a table before, we will have you up and running in no time. We also will provide ON SITE TRAINING for an additional charge depending on your requirements.

Training and support is unlimited and a 12 month unconditional warranty on controller and motor will be provided.

Other options include plasma machines , voltage height adjusters, plate height adjuster , and drawing packages. Contact CNC Solutions at cncsolutions@cnccuttingmachines.com for pricing.

Tags: 2x4, 4x4, Accidental Damage, Axis Travel, Bearing System, build cnc plasma, cnc arc, cnc mill 4 axis, cnc mill machinist jobs, cnc mill motor, cnc milling machine operator, cnc pcb milling, cnc plasma operator, cnc you tube, cupcake cnc, Cutting Area, Cutting Table, Draft System, Drain Plugs, easy cnc mill, Extreme Precision, Fan System, flatbed cnc, Gantry, how to build a cnc plasma cutter, how to use plasma cutter, hypotherm plasma, laser vs plasma, Linear Rail, mastercam milling, plasma circle cutting guide, Plasma Cutter, plasma cutter how to, Plasma Cutting, plasma cutting how to, plasma gouging, Plasma Torch, Precision And Accuracy, Slag, Stepper Motors, torch cutting guide, Wall Tubing, xy cnc

Trackback URI | Comments RSS